开云游戏

INDUSTRY&PRODUCTS
Your location is:Industry&products >> Soft seal gate valve >> Soft seal rising stem gate valve
Soft seal rising stem gate valve
Product overview
The rising stem handwheel type elastic seat seal gate valve adopts the straight through flow channel design. The high-performance rubber is fully covered with the gate, so the sealing is reliable and the operation is easy. The valve rod does linear reciprocating motion during operation. It is mainly used in domestic water system, water supply and drainage system, sewage treatment system, etc. it is used as a cut-off device on the fluid transmission pipeline of construction, urban environmental protection, petrochemical, electric power and other industries (not applicable to throttling).
Product details
Product features
Integral rubber covered valve disc;
Fixed disc nut;
Flat seat;
The shaft seal adopts three O-rings;
Full bore design, low water loss;

Non toxic epoxy resin electrostatic coating.


Product standards
Manufacturing standard: CJ / T216
Flange connection standard: GB / T17241.6
Structural length standard: GB / T12221

Test standard: GB / T13927


Technical parameter
Nominal diameter: DN50 ~ DN300 (2 "~ 12") (except for DN 125)
Nominal pressure: PN25
Working temperature: 0 ° C ~ 85 ° C
Sealing test: 1.1PN
Shell test: 1.5PN
Applicable medium: water



+86-21-66059111
qrCode
站点地图-xml  
开云游戏(中国)集团有限公司-官网